CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

butterfly mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2003, 08:50
Default butterfly mesh
  #1
giosue
Guest
 
Posts: n/a
hi... I'm a new starCD user, I'd to generate a tube with butterfly mesh (o-grid mesh)to avoid small cells near the tube center. Does anybody help me to perform that? tanks
  Reply With Quote

Old   February 17, 2003, 13:18
Default Re: butterfly mesh
  #2
cjtune
Guest
 
Posts: n/a
You can look into this thread: http://www.cfd-online.com/Forum/starcd.cgi?read=2639
  Reply With Quote

Old   February 24, 2003, 19:21
Default Re: butterfly mesh
  #3
Joern Beilke
Guest
 
Posts: n/a
csys 1
cdel all
vdel all
ccom all
y



v 1
v 9 1
vfill 1 9
vgen 5 10 1 9 1 0 1 / 8
vset all
numb vert on
vsty 4 4
vplo
vgen 5 10 41 45 1 0 1 / 8
vset all
vplo
ctab 1 shell 2
c 1 2 12 11
cset,all
cdisp,on,vert $vstyle,4,4,1
cplot
cset all
cgen 8 1 cset
cset,all
cplot
cgen 4 10 cset
cset,all
cplot
cgen 5 10 25 28 1
cset,all
cplot
repl
zoom,off $replot
pldi,off,all $pldi,on,box $wind,0,0,13.3,10 $replot
csys 2
v 49 1 45
repl
vfill 45 49
repl
vfill 6 46 3
rp4 1 1 0
repl
v 85 1 45
vfill 45 85 3
repl
vfill 51 55
rp4 10 10
repl
vset all
vmer vset
cplot
vset all
cset all
vlis mxv
vgen 4 100 vset ,,, 0 90
cgen 4 100 cset
cset,all
cplot
zoom,off $replot
numb all off
repl
vset all
vmer vset
n
edge on
cplot
edge off
cplot
vset news edge
repl
vell 50
repl
  Reply With Quote

Old   February 25, 2003, 08:50
Default Re: butterfly mesh
  #4
giosue
Guest
 
Posts: n/a
thanks a lot !!!!
  Reply With Quote

Old   February 25, 2003, 09:23
Default Re: butterfly mesh
  #5
stefan
Guest
 
Posts: n/a
another script (using parameters):

!Creates a single butterfly pipe
!Set radius :
*set r1 1.5
!Set number of cells in radial direction :
!(This number should be even)
*set nr1 12
!Set length :
*set l 10
!Set no of z planes :
*set nz 25
*set nv1 1
*set nv2 nr1 + nv1
*set nr12 nr1 / 2
v nv1 0
v nv2 r1
vfil nv1 nv2
vset,,
vgen nv2 nv2 vset,,,0 r1 / nr1
ctab 2 shell 8
c nv1 nv1 + 1 nv1 + 1 + nv2 nv1 + nv2
cgen nr1 1 1
cset,,
cgen nr1 / 2 nv2 cset
*set nc1 nr1 / 2 - 1 * nr1 + 1
*set nc2 nr1 / 2 + nc1 - 1
cgen nr1 / 2 + 1 nv2 nc1 nc2
*set nvf2 nr1 / 2 * nv2 + nv2
csys 2
v nvf2 r1 45
vfil nv2 nvf2 nr1 / 2 - 1
vfil nr1 / 2 + 1 nv2 nr1 / 2 - 1,,,nr1 / 2 + 1 nv2
*set nvf3 nv2 * nr1 + nr12 + 1
vequ nvf2 nvf3
vfil nvf3 - nr12 nvf3
vfil nr12 * nv2 + 1 nvf3 - nr12 nr12 - 1,,,nr12 + 1 1
vset all
vgen 4 nv2 * nv2 vset,,,0 90
cgen 4 nv2 * nv2 all
cset all
vset news cset
vmer vset,,.001
cont
vset news edge
vsmoo 1 50
cset,,
vset news cset
vset inve
vdele vset
vcom all
y
*set dz l / nz
ctyp 1
vcex nz mxv - 1 cset,,,loca 0 0 dz
cset news flui
view 1 1 1
plty ehid
cplo
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Butterfly valve ap FLUENT 4 February 17, 2011 04:18
Blade pitching, butterfly valves, moving mesh Andy Fiedler CFX 6 May 28, 2010 08:55
Butterfly simulation J.Szary CFX 2 September 19, 2008 17:48
Torque for butterfly valve J.Szary FLUENT 1 September 5, 2008 17:28
butterfly valve C. K. Main CFD Forum 1 April 2, 2006 23:30


All times are GMT -4. The time now is 15:38.