CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Mesh Problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 18, 2003, 10:13
Default Mesh Problems
  #1
Kwenda Lino Merkel Lima
Guest
 
Posts: n/a
I am academical student come for this half somebody to be seen it gets me to explain some more precisely doubts that I have in the STAR-CD, in PROAM. He/she thanked your attention. My problem is that I don't get to build meshes with sub-domains, in other words, I have a box (static domain) and inside of this I have a cylinder (movable domain). Inside of the cylinder (movable domain) she is a candle. My problem is that PROAM makes the mesh among the box (static domain) and the cylinder (movable domain) but she doesn't do between the cylinder and the candle. How is it that should proceed? Thank you for your attention, good work.
  Reply With Quote

Old   February 18, 2003, 11:21
Default Re: Mesh Problems
  #2
cjtune
Guest
 
Posts: n/a
Just mesh both subdomains separately with ProAM using the same coordinate system, and then declare 'attach' boundary pairs at the contact surfaces between the two subdomains.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems about dynamic mesh qinnan OpenFOAM Running, Solving & CFD 0 December 16, 2008 06:23
Problems with non-conformal mesh Nicolas Ruiz FLUENT 4 April 9, 2008 07:36
problems with VERY simple mesh Ralf Schmidt FLUENT 7 October 17, 2006 07:21
problems with mesh in Gambit chris lee Main CFD Forum 0 August 12, 2003 21:04
Problems with moving mesh Valery Ponyavin CD-adapco 2 January 28, 2003 23:48


All times are GMT -4. The time now is 02:55.