CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 26, 2003, 13:41
Default Mesh
  #1
Kwenda
Guest
 
Posts: n/a
I have two meshes, one among a box and a cylinder that it is supposed to be static and the other between this cylinder and another smaller cylinder, that he is inside of this, that supposedly corresponds to a movable mesh. My problem is that a disconnected exists among those two meshes, which are the steps that I have to give to solve such problem. I thank your released attention, thank you.
  Reply With Quote

Old   February 26, 2003, 22:20
Default Re: Mesh
  #2
cjtune
Guest
 
Posts: n/a
You need to declare 'ATTACH' boundaries on the two surfaces. Even so, the grid check will come up with 'crack' errors but you can ignore that -the separated surfaces will be matched dynamically during mesh movement as 'events', using the EVSL event, and subsequently the EMSL and ESSL commands.

If you haven't gone through it yet, you should try doing tutorial 7.2.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create fine mesh that grows to coarse mesh (Urgent CZ FLUENT 1 January 3, 2009 11:36
Oscillatory mesh motion setup mesh flux ERROR jaswi OpenFOAM Running, Solving & CFD 5 August 23, 2007 04:41
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
dynamic mesh - structured or cooper mesh Manoj Kumar FLUENT 2 November 11, 2005 02:18
How to convert STAR mesh into FLUENT mesh ? Jihwan CD-adapco 8 November 10, 2004 05:11


All times are GMT -4. The time now is 07:01.