CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   About fix wall temperature in wall boundary (http://www.cfd-online.com/Forums/cd-adapco/53241-about-fix-wall-temperature-wall-boundary.html)

joon March 9, 2003 21:14

About fix wall temperature in wall boundary
 
Hi! I am working on a heat exchanger and trying to use a fixed wall temperature in wall boundry condition. My question is that the wall temperature that I have to input is a reference temperature or absolute temp. Meaning that do I have to input a temperature difference between a real value and a temperature that I gave for reference or just the value of temperature itself. I know that in pressure boundary condition you have to give a difference value to a reference pressure that you already gave. I saw the manual and I think that I have to give the real value but I just want to make sure! Thank you in advance.

Thomas March 10, 2003 02:39

Re: About fix wall temperature in wall boundary
 
Yes, you have to give the real temp.

joon March 10, 2003 02:41

Re: About fix wall temperature in wall boundary
 
Thank you Thomas!


All times are GMT -4. The time now is 02:09.