CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Saving FLUXSUM in a parameter

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 10, 2003, 10:31
Default Saving FLUXSUM in a parameter
  #1
Martin Janson
Guest
 
Posts: n/a
Hi,

I am writing a macro for post processing and want to keep it general. Is there some way of saving the result of the fluxsum command into a parameter for later use? Alternatively: how do I calculate the mass flow through a cell layer if I already have a cell type for that layer and want to avoid having to define a section for it (the reason being that I can't easily define a cell set to perform the integrate command on)? I can easily define a coordinate system for each cell layer to define the normal direction.

Thanks,

/Martin Janson, Volvo Cars
  Reply With Quote

Old   March 10, 2003, 14:16
Default Re: Saving FLUXSUM in a parameter
  #2
Joern Beilke
Guest
 
Posts: n/a
You can do something like


ofile file.out
fluxsumm ...
ofile screen
system
convert.pl file.out file.in
ifile file.in


The "convert.pl" or a similar script reads the output from prostar and writes out

*set flux 1e99

The other way it to contact adapco and ask for the implementation of a direct way.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
expert parameter sometimes1900 CFX 3 October 27, 2008 12:41
NFMAX parameter Sileno Phoenics 2 January 12, 2005 04:42
Saving Alexandre CD-adapco 1 December 17, 2001 03:12
Penalty Parameter Kai Kang Main CFD Forum 1 March 13, 2001 03:38
trouble with fluxsum Jordi CD-adapco 2 September 29, 2000 03:57


All times are GMT -4. The time now is 02:49.