CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Use subroutine (https://www.cfd-online.com/Forums/siemens/53248-use-subroutine.html)

Moon March 13, 2003 06:05

Use subroutine
 
Hi

I want to use subroutine, SORKEP.f. (I turn on the switch 12.) when I started new analysis, I have got follow messages.

"sorkep.f",line 89.10: 1515-019 (s) syntax is incorrect. "sorkep.f".line 89.10: 1515-018 (S) Incorrect character found in source at line 89 in column 10. Hexadecimal value of character is 00. "sorkep.f",1515-002 (S) END card is missing. One is assumed. **sorkep === End of compilation 1 === 1501-511 Compilation failed for file sorkep.f. ################################################## ##

WARNING: Command execution error. Please check screen output for details

################################################## xlf: 1501-228 input file ufile/*.o not found ##################################################

WARNING: Command execution error. Please check screen output for details

################################################

There were errors during linking. Please check screen output for details

What's wrong with me??

Thomas March 13, 2003 08:49

Re: Use subroutine
 
well, there seems to be an error in your sorkep.f in line 89. thats what the compiler tells you. you have to check your subroutine.

thomas


All times are GMT -4. The time now is 08:03.