CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

shock tube: problem initiation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 20, 2003, 09:22
Default shock tube: problem initiation
  #1
Gareth
Guest
 
Posts: n/a
I have tried to model a shock tube, but am struggling to get the initial conditions right, because in order to define the different pressures, it seems one has to define 2 fluids, and it seems that one cannot have different fluids in adjacent cells. I have tried defining baffle cells between them and then removing the baffles (using the events module), but this doesn't seem to work either.

Has anyone succeeded in doing this kind of thing without using subroutines? (I don't have the fortran compiler)

Any feedback would be appreciated.

Gareth
  Reply With Quote

Old   March 26, 2003, 11:46
Default Re: shock tube: problem initiation
  #2
Dean
Guest
 
Posts: n/a
Hi, i had the same problem a few years back when also running a shock tube case.

I got around this by defining a dummy model with two fluid(material) types, each with a different initial pressure, separated by a baffle. I ran this for 1 iteration and then smapped the results onto my shock tube model (one material type, no baffle), hence defining the initial conditions. Hope this helps ..

Regards Dean
  Reply With Quote

Old   April 4, 2003, 05:30
Default Re: shock tube: problem initiation
  #3
nandu
Guest
 
Posts: n/a
Hello gareth,

I'd like to know if you are trying to model the shock tube in conjunction with experimental results for shock interaction or for expansion wave interactions. the method suggested by Dean seems to be the best for simulating an entire shock tube. but the driver and driven sections can be modelled seperately using pressure/inlet boundaries depenending on which wave u are trying to model (the shock or the expansion)

cheers nandu
  Reply With Quote

Old   April 15, 2003, 03:23
Default Re: shock tube: problem initiation
  #4
Gareth
Guest
 
Posts: n/a
Thanks Nandu

I actually ended up doing what you suggested after a suggestion from someone else. It worked fine. I was trying to get an idea of the abillity of CFD to model shock waves, particularly in shock tubes for a research idea in the area of engine design.

Have you had experience in modelling shock tubes in conjunction with experimental results? What for, and how did the results compare. I assume you are in mech eng at Wits. Is it part of a MSc or PhD? I'd be interested to email further.

Regards

Gareth
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shock Tube problem mouna lamnaouer FLUENT 1 September 22, 2011 12:47
Sod Shock Tube problem cfd Main CFD Forum 4 July 7, 2009 13:24
Shock tube Problem 21kalee OpenFOAM Running, Solving & CFD 2 June 12, 2008 06:57
SOD shock tube problem Luuk Main CFD Forum 3 September 6, 2005 05:08
Shock tube problem AB CD-adapco 1 November 9, 2004 00:25


All times are GMT -4. The time now is 15:28.