CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

3Gb RAM!!!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 31, 2003, 08:26
Default 3Gb RAM!!!!!
  #1
Giovanni
Guest
 
Posts: n/a
Hello everyone,

I have to run an analysis that needs 3GB of RAM.

Using a 32 bit machine it isn't possible to run a single job that uses more than 2GB of Ram. The solution should be a cluster of machines.

But a bi-processor??? (1.5GB * 2 processors)

Do you have experience of this problem?

Thank you very much Giovanni
  Reply With Quote

Old   April 1, 2003, 08:53
Default Re: 3Gb RAM!!!!!
  #2
Marc
Guest
 
Posts: n/a
Yes, I have.
A dual processor board could be a solution, but I guess it will be difficult to find a intel based one, which has at least 6 slots for 512 MB memory chips. All the other possibilities 1024 MB chips and appropriate boards have not been affordable six months ago. Maybe they are now.
Greetings Marc
  Reply With Quote

Old   April 1, 2003, 13:56
Default Re: 3Gb RAM!!!!!
  #3
Joern Beilke
Guest
 
Posts: n/a
You can run it on an 2 processor machime with 4 GB of memory (very expensive) in 2 ways:

starlink -Y (uppercase) on 2 processors

or

run it as a 4 processor job (even on a 2 processor machime)

The second one should run more stable but requires a 4 proc. license.

The other way is to switch to a 64 bit platform, run it on a cluster or create a better mesh.

  Reply With Quote

Old   April 2, 2003, 06:42
Default Re: 3Gb RAM!!!!!
  #4
Giovanni
Guest
 
Posts: n/a
So a dual xeon 2.66GHz with 4GB of RAM and Linux is ok!!

Thank you Giovanni
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 03:18.