CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Loading transient data of moving grid (http://www.cfd-online.com/Forums/cd-adapco/53282-loading-transient-data-moving-grid.html)

leo April 7, 2003 21:41

Loading transient data of moving grid
 
I am dealing with a transient problem with moving grid. I am using subroutine NEWXYZ to move the grid. It works well. But when I doing postprocessing, I load the transient data, there is an option of moving grid or not. The help file said, if I want to load the moving grid, I have to use some " events". Now, the problem is, I didn't using events to moving the grid. So, I can only get the origional location of the grid during the transient steps. Although, I can load the velocity and other variable like pressure.. Thanks.

Joern Beilke April 8, 2003 16:21

Re: Loading transient data of moving grid
 
Try the command "getv coor" after loading the time step (store ...) to get the vertex coordinates.


leo April 8, 2003 18:33

Re: Loading transient data of moving grid
 
Thanks for your reply. You mean, if I use that command, I can get the moved vertex coordinats?

leo April 9, 2003 01:35

Re: Loading transient data of moving grid
 
Thanks. It works.


All times are GMT -4. The time now is 15:01.