CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

spray injection.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 10, 2003, 08:13
Default spray injection.
  #1
Moon
Guest
 
Posts: n/a
Hi~ I have problems. First one is that I don't know void fraction in spray injection problem.

I have got the warning message when calculation started.

*** WARNING #016 *** VOID FRACTION OF CELL 123966 IS TOO LARGE - .451. IT IS SET TO - .400

what is void fraction? And how I control void fraction value??

Second problem is below message that I got the message when calculation start.

1527-097 A READ statment using decimal base input found the invalid digit '*' in the input file. the program will recover by assuming a zero in its place.

What is wrong with me?? I dont understand... Problems are very serious to me..

Please help me!!

Thank all~
  Reply With Quote

Old   May 5, 2003, 04:12
Default Re: spray injection.
  #2
Stefan
Guest
 
Posts: n/a
void fraction is the ratio of the cell volume occupied by the spray to the total cell volume. For Langrangian computations, this should be as small as possible, in Star-CD, a limit of 0.4 is set. So, if your void fraction is .45 Star-CD sets the computed value to 0.4. I don't know anything about the second warning message.
  Reply With Quote

Old   May 6, 2003, 02:06
Default Re: spray injection.
  #3
Thomas
Guest
 
Posts: n/a
The second message says, that in your .prob-file you have due to certain reasons '*' and not a number as expected.

try this: in prostar set the number of iterations to, lets say, 999999999999 (a very high number) and do a problem-write. when you then look at the file, you will see a '*' instead of 999999999999. the warning message now says, that star ignores the '*' and uses 0 as a numerical value.

hope this helps,

Thomas
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
spray injection Johannes P. Siemens 8 January 14, 2009 09:38
Urgent help needed with spray injection nick Siemens 14 June 29, 2008 19:48
Spray Injection usker Siemens 2 April 6, 2007 01:41
spray injection mmacrb FLUENT 0 January 10, 2007 05:57
water injection into air (not spray) bioman66 CFX 1 July 11, 2006 07:34


All times are GMT -4. The time now is 10:04.