CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

inlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 11, 2003, 06:11
Default inlet
  #1
Sabatini
Guest
 
Posts: n/a
Hay I am trying to set boundary conditions of 'fully developed flow' at the square duct inlet without preliminary calculation. How can I set the BC's. Thanks.
  Reply With Quote

Old   April 22, 2003, 13:08
Default Re: inlet
  #2
allan
Guest
 
Posts: n/a
methodology manual p 5-6 says for one layer of cells in the streamwise direction, impose a uniform pressure boundary on the 'inlet' plane and a prescribed flow outlet condition on the outlet plane

allan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
velocity inlet vs pressure inlet cheong FLUENT 6 April 9, 2011 03:07
subsonic inlet or supersonic inlet? mali CFX 0 November 28, 2008 20:57
about inlet bc ivanyao OpenFOAM Running, Solving & CFD 0 November 25, 2008 03:17
reversed flow at velocity inlet / mass flow inlet ib FLUENT 1 March 26, 2007 13:11
How to set smoke inlet speed on inlet Adam FLUENT 0 October 4, 2005 08:18


All times are GMT -4. The time now is 00:28.