CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Multi Phase option problem....

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 21, 2003, 12:52
Default Multi Phase option problem....
  #1
Christos Sfyris
Guest
 
Posts: n/a
Hi StarCD experts! I'm trying to run an analysis using the multi phase treatment on "Lagrangian Multi-phase". I have already solved my geometry (which is on Transient) and now I'm trying to put some Droplets.. When I restarting the analysis and I'm receiving a very "wierd" message:

" *** GEOMETRICAL CALCULATIONS STARTED *** GEOMETRICAL CALCULATIONS COMPLETED

*** ERROR #244 *** MULTI-PHASE OPTION CHOSEN: INADEQUATE PARAMETER NCMAXV or/and NCTMXC IN parm.inc "

I have already tried to correct the value in the prosize file with no luck... Can anyone suggest something?
  Reply With Quote

Old   May 22, 2003, 07:53
Default Re: Multi Phase option problem....
  #2
John
Guest
 
Posts: n/a
Could be a prostar bug or could be caused by your not writing geometry file after turning on droplet. The solution is very simple: just edit parm.inc and put NCMAXV = NCMAX, NBMAXV=NBMAX, NBTMXC=NBMAX, NCTMAXC=NCTMAX and use starlink again.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem about multi-phase analysis (Urgent) Prof. Lau (PolyU) CFX 2 February 9, 2007 18:59
A strange problem when doing multi-phase flow Yun Kang CFX 0 September 28, 2006 09:26
Phase change with granular option. MP FLUENT 0 February 2, 2003 22:15
heat transfer problem in multi-phase flow verypuzzled CFX 1 October 3, 2001 11:16
Multi-phase cehuang FLUENT 2 October 1, 2001 15:25


All times are GMT -4. The time now is 09:06.