CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Collapsed cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2003, 05:03
Default Collapsed cells
  #1
Julie Polyakh
Guest
 
Posts: n/a
In my model I deal with a 3-degree combustor chamber sector geometry, therefore the region at the symmetry axis is very problematic for meshing. I've tried to creare there cells of different sizes, but it doesn't help: error message about collapsed cell faces keep appearing. (However, the cells look 'uncollapsed'.) Maybe I shouldn't pay attention to this messages?

Thanks,

Julie
  Reply With Quote

Old   July 10, 2003, 15:41
Default Re: Collapsed cells
  #2
Not_even_close
Guest
 
Posts: n/a
you have to vmerge the vertices at the center. Check face collapsed cells, then cfix them.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with Meshing: Collapsed Cells Emmanuel Resch CD-adapco 1 July 30, 2007 03:02
collapsed face founded through geometry write. guang ai CD-adapco 0 August 9, 2006 21:52
negative volume & collapsed faces Tipakorn CD-adapco 1 March 7, 2006 01:41
how to deal with the collapsed faces limingtiger CD-adapco 2 July 15, 2005 06:44
Collapsed faces Aline CD-adapco 2 July 7, 2004 06:50


All times are GMT -4. The time now is 12:02.