CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Can this warning influence the results?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 11, 2003, 04:57
Default Can this warning influence the results?
Posts: n/a
when I finished running a model (the boundary in inflow region is a stagnation boundary, the boundary in outflow region are several pressure boundary),I found one warning message at the first some iterations: *** WARNING #061 *** RATIO OF STAGNATION PRESSURE AND STATIC PRESSURE AT REGION 1 CELL *** LESS THEN 1. TEMPORARILY SET TO 1.

And when I checked the solution,I doubted the results are correct,but I was not sure that.

So is there anyone who can tell me whether the above warning messages would influence the results?

Thanks a lot for your kind help!


  Reply With Quote

Old   July 11, 2003, 06:40
Default Re: Can this warning influence the results?
John L
Posts: n/a
Since this message only appears at the start of your calculation (which is quite normal as the flow inside tries to adjust), it will definitely NOT affect your results.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gravity (g) Influence on Simulation Results Colin FLUENT 12 September 23, 2015 09:45
Pressure influence Fanny Main CFD Forum 1 January 31, 2009 00:39
influence of yplus Flo Main CFD Forum 5 July 24, 2008 01:31
Influence of Y+ value xiang FLUENT 3 February 6, 2004 20:31
Gravity g's influence on Simulation Results Colin Main CFD Forum 6 November 2, 2003 15:13

All times are GMT -4. The time now is 09:04.