CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Problems saving graph registers data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 23, 2003, 04:50
Default Problems saving graph registers data
  #1
Julie Polyakh
Guest
 
Posts: n/a
Prostar doesn't save graph registers data. It just creates an empty file case.grf.
  Reply With Quote

Old   July 23, 2003, 09:44
Default Re: Problems saving graph registers data
  #2
Timo Kurz
Guest
 
Posts: n/a
Hi Julie!

You just have to save it two times, then it should work. I think itīs a bug in the program.

mfg Timo
  Reply With Quote

Old   July 23, 2003, 09:55
Default Re: Problems saving graph registers data
  #3
Julie Polyakh
Guest
 
Posts: n/a
Hi Timo,

Thanks for your advise, but it doesn't work...
  Reply With Quote

Old   July 23, 2003, 12:36
Default Re: Problems saving graph registers data
  #4
cjtune
Guest
 
Posts: n/a
You need to CLOSE the file first, otherwise ProSTAR will just keep it in memory until you exit (at which point the .grf file will be also fully written down to disk).

eg. CLOS "XYX.GRF"

  Reply With Quote

Old   August 6, 2003, 13:32
Default Re: Problems saving graph registers data
  #5
Micha
Guest
 
Posts: n/a
I think it is important to give exactly the right number of registers to be saved. If you have 4 registers with data you want to save, saving doesn't work when you write 5 in the box for "number of registers" to be saved. I had the same problem and this was the solution for it in my case.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to read the data from the graph Kottam Main CFD Forum 2 June 14, 2008 16:46
saving data mange FLUENT 3 October 14, 2004 18:40
Automatically saving a line graph Astrid CFX 1 April 28, 2003 06:48
Saving graph register data into a file Julie Polyakh CD-adapco 1 January 27, 2003 22:35
Post-process: how to extract Graph Registers' data Jiaying Xu CD-adapco 11 July 17, 2002 04:38


All times are GMT -4. The time now is 17:42.