CFD Online URL
[Sponsors]
Home > Forums > CD-adapco

Single rotating reference frame

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 26, 2003, 11:24
Default Single rotating reference frame
  #1
jing
Guest
 
Posts: n/a
Hi!

I am a bit of confused of configuration within a single rotating reference frame.

My flowfield, my boundary conditions are all rotating with a same velocity . In the inlet boundary, if I define U, V, W as relative veloctiy, should OMEGA at the inlet boundary panel be ZERO, or some other value? And, how about the OMEGA in the initialisation panel, if the UVW is also relative, should it be ZERO?

The monitored data is relative velocity, or absolute one, in which coordinate?

Thanks!

Jing
  Reply With Quote

Old   August 29, 2003, 13:44
Default Re: Single rotating reference frame
  #2
m-hack
Guest
 
Posts: n/a
Dear Jing,
with the rotation refecence frame you do not change any velocities, but you add centrifugal and coriolis forces to your momentum equations. If your complete region is rotating, you should define the OMEGA of your spinning fluid (Spin index of CTYPE). All velocities are then defined in your rotating frame, are therefore relative ones. As long as I know the OMEGA field in the BC window is used to define a swirl at the inlet. The vectors displayed should look somehow different, when applying swirl. Note that the units of OMEGA is the only one which is not SI! It's rpm.
Greetings, Marc
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gravity in single rotating reference frame QinxueTan FLUENT 0 May 7, 2008 07:59
Single rotating reference frame Belete Kiflie FLUENT 6 June 18, 2006 04:38
single frame reference nabeel FLUENT 0 September 15, 2004 08:31
single reference frame michele CD-adapco 1 April 13, 2004 17:15
Stirred tank with baffles simulation using single rotating reference frame M.Zhou FLUENT 1 March 5, 2000 16:01


All times are GMT -4. The time now is 22:32.