CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

combuston in ICE Weller model II

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 3, 2003, 12:28
Default combuston in ICE Weller model II
  #1
roadracer
Guest
 
Posts: n/a
Hi all. I have partly fixed my previous problem, but the combustion still doesnīt take place. I am using Regvar-Pr Weller model with standard coefficients. The chemical reaction is C8H18 + 12.5O2 -> 8CO2 + 9H2O Chemico thermal enthalpy is turned on, and I have previously set up an active scalar to trace the burnt gases from previous cycles. The calculation restarts from a pst file of a previous calculation ran without combustion. I have set up the combustion module and the various new scalars (C8H18,O2,CO2,H2O,N2,RVB), and they all except the latter, which is "transported", are "internal". If I restart the calculation with RVB=0 the combustion canīt take place and the temperature and pressure behaves normally. If I restart the calculation with RVB=1 the temperature and pressure suddenly increase and when the ignition time is reached I get the message

*** WARNING #042 *** PROCESS NOT FULLY CONVERGED -- EQ.,NIT,RESI: SC1 1 0.26948E-02

*** WARNING #043 *** MINIMUM RESIDUAL AT THE END, RETURNING NON-CONVERGED SOLUTION

and the combustion doesnīt start. Does anybody has an idea of the reason of this strange behaviour of P and T? Any help apreciated Best regards Roadracer
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Where to find the theory for weller flamet combustion model 21kalee OpenFOAM Running, Solving & CFD 7 December 19, 2012 18:18
Combustion in ICE - Weller model roadracer CD-adapco 1 July 22, 2009 04:54
weller+problem Kuriakose CD-adapco 0 March 12, 2007 05:34
Weller 3 Equation Kuriokose CD-adapco 0 March 1, 2007 02:52
Weller combustion model roadracer CD-adapco 0 October 6, 2003 05:07


All times are GMT -4. The time now is 22:45.