CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Erosion problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 21, 2003, 03:07
Default Erosion problem
  #1
Ko
Guest
 
Posts: n/a
Dear All,

Is there anyone who has the experience in simulating erosion problem by using STAR_CD? I have done all the jobs, including calculating the two-phase flow and use the subroutines for erosion model as well as rebound model to calculated the erosion. But when I finished all of the procedures, all the data of erosion rate, erosion ratio, impact velocity and impact angle are zeros. Can anyone tell me what happened?

Ko
  Reply With Quote

Old   September 24, 2003, 05:47
Default Re: Erosion problem
  #2
Anton Lyaskin
Guest
 
Posts: n/a
In the 15th issue of Star-CD newsletter there was a small article on errosion modelling. It was done by Wood Group Pressure Control Ltd, you can try to contact them.
  Reply With Quote

Old   September 24, 2003, 07:48
Default Re: Erosion problem
  #3
HVN
Guest
 
Posts: n/a
Sometimes, this indicates that you have some problems with the particule trajectory calculation. Do you check that all particules exit the fluid domain.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
EROSION UDF shehab abdelrahman FLUENT 1 February 12, 2008 06:15
Pipe bend erosion problem John Yang FLUENT 2 December 12, 2007 05:06
about erosion problem caused by solid particles hannah CFX 4 August 20, 2003 04:42
Erosion David Connolly Phoenics 1 June 24, 2002 06:16


All times are GMT -4. The time now is 04:57.