CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Lagrangian multiphase switch

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 10, 2003, 05:58
Default Lagrangian multiphase switch
Alfred Herman
Posts: n/a
Iam simulating a diesel engine with transient mesh. To simulate fuel injection, I had switched on the Lagrangian multiphase switch and given the relevant droplet properties through automatic initialisation (spray modelling) panel. But when the solving is initiated, I get the following message:Bus error <coredump>. On switching off the switch and solving, I do not get the error message. I need a clarification on this.

  Reply With Quote

Old   October 14, 2003, 07:28
Default Re: Lagrangian multiphase switch
Posts: n/a
Hi, If you have multiple CPU machine, try to solve the same problem with STAR HPC. I faced similar problem while solving big mesh problem involving aeroacoustic analysis. After splliting the problem it worked fine. Better get clarification from support. In my tasclist also this clarification from support is pending....

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
lagrangian multiphase analysis Marco CD-adapco 3 September 22, 2008 09:43
lagrangian multiphase analysis bala CD-adapco 3 April 28, 2008 02:13
lagrangian multiphase analysis bala CD-adapco 2 April 24, 2008 07:52
lagrangian multiphase analysis bala CD-adapco 0 April 15, 2008 01:35
analysis restart for lagrangian multiphase mic CD-adapco 0 July 5, 2007 08:36

All times are GMT -4. The time now is 20:41.