CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

non converged solution

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 21, 2003, 06:03
Default non converged solution
  #1
Holger
Guest
 
Posts: n/a
Hello!

In my modell, long after all the droplets are injected, I get the following warnings:

*** WARNING #042 *** PROCESS NOT FULLY CONVERGED -- EQ.,NIT,RESI:TRUE 1 0.30544E-03

*** WARNING #043 *** MINIMUM RESIDUAL AT THE END, RETURNING NON-CONVERGED SOLUTION

The calculations don't stop here, but the concentration of the injected ISO-Octan doesn't move on inside the zylinder from the moment the warnings are posted the first time. However the droplets move on through the zylinder. Can anybody help me???

Thanks a lot! Holger

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solution converged, and then diverge again. jrg FLUENT 2 April 1, 2013 23:10
solution converged! Hai Duc FLUENT 6 February 27, 2008 10:17
Calculate a converged flow solution kumar FLUENT 2 May 24, 2007 01:33
loading new mesh in converged solution Claudia FLUENT 1 November 4, 2005 06:23
converged solution or correct solution SAM FLUENT 1 October 12, 2004 15:38


All times are GMT -4. The time now is 00:38.