CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

pro*am issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 22, 2003, 07:57
Default pro*am issue
  #1
carno
Guest
 
Posts: n/a
Hi,

I am creating tetras in pro*am. But while creating subsurface it is giving proble. The subsurface is getting created above the geometry. Because of this the tetra generation batch run is coming out giving fatal error message that 'self intersecting surface' (surface check does not give any error of self intersecting surface) Has anybody faced this problem before? Please help. Thanks,
  Reply With Quote

Old   October 22, 2003, 11:42
Default Re: pro*am issue
  #2
Brian
Guest
 
Posts: n/a
Sounds like your some of shell cells are facing the wrong way. Use the command PLFA ON to plot the faces by colour - I can't remember whether they should all be red or green, but they should all be the same.

The above confused statement is trying to indicate that the direction used for the subsurface is defined by the left or right-handedness of the shells. You may have to CFLIP some of them.
  Reply With Quote

Old   October 22, 2003, 14:45
Default Re: pro*am issue
  #3
paul
Guest
 
Posts: n/a
There have been many significant improvements, both in trimming and sub-surface generation, in ammbatch lately. Make sure you have the latest release from the adapco ftp site.
  Reply With Quote

Old   October 23, 2003, 04:32
Default Re: pro*am issue
  #4
carno
Guest
 
Posts: n/a
Thanks Brian and Paul,

There was problem of cell facing (as per Brian's comment) which is solved now. I did shell orientation in pro*am itself (GUI).

Thanks a lot
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ and y* issue Freeman FLUENT 8 December 7, 2013 15:23
Geometry Issue! Mann CFX 2 January 14, 2008 16:33
CHT issue john CD-adapco 0 May 10, 2004 03:26
pro*am issue john CD-adapco 1 March 18, 2004 15:51
CHT issue carno CD-adapco 3 September 23, 2003 01:30


All times are GMT -4. The time now is 09:37.