CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   cell to cell relation (http://www.cfd-online.com/Forums/cd-adapco/53571-cell-cell-relation.html)

CMB December 1, 2003 10:06

cell to cell relation
 
Hi,

I made this matching list between 2 sets of cells. These sets are separated from one another but still are related by matching pairs, say cell is from set 1, set12(is,1), has only one matching pair cell at set 2, set12(is,2). That is for each of the cells in set 1 there is one cell in set two that matches with it. I created a list from ICLMAP cell numbers in POSDAT but now I would like to use it in other subroutines, like in fluinj or sorsca. The problem is that these cell numbers have no meaning because iclmap cannot be called from this subroutines. How can I establish a relationship on a cell to cell basis, rather than with an ICTID to ICTID relation?. I appreciate any help, many thanks

roadracer December 4, 2003 05:05

Re: cell to cell relation
 
Hi. you have to create a correspondance map in posdat and store it in a common block. In this way the correspondance map is accessible to any subroutine that includes that common block. Roadracer


All times are GMT -4. The time now is 18:51.