CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Grid does'nt move!?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 12, 2004, 05:13
Default Grid does'nt move!?
  #1
Sabe
Guest
 
Posts: n/a
Hi, Problem description: I do want to solve a transient problem with a rotating grid. Therefor, I defined a ASI in a .MAC file, that is executed before the coputation. When I test the event using the EVPREP, it works. The comiling with pmovlink worked without problems and the computation was successful as well. BUT when it comes to check the transient file, the grid did not move, explaining the weird results I obtained! How can that be? With regards, SaBe
  Reply With Quote

Old   February 12, 2004, 06:21
Default Re: Grid does'nt move!?
  #2
Jörn Beilke
Guest
 
Posts: n/a
1) evfi conn

2) load ,, or trload ,,

if you use the gui then there is a button with "static grid/moving grid"

when using the command line the moving grid is on by default

if you forget to connect the event file you can use "getv coor" to get the new vertex positions.

  Reply With Quote

Old   February 12, 2004, 07:49
Default Re: Grid does'nt move!?
  #3
Sabe
Guest
 
Posts: n/a
Dear Jörn Beilke, I forgot to say, that the problems where at the post transient file, that means everything works well, the evn file is created, the evt also, the pstt is written, but the grid did not moving during the computation, although the testing before starting the computation of the events and moving grids was successfull! regards, SaBe
  Reply With Quote

Old   February 13, 2004, 06:32
Default Re: Grid does'nt move!?
  #4
Thomas
Guest
 
Posts: n/a
a long time ago, that i did moving grid problems, but i rember there is a file (pmov.out?) where all commands from prostar-batch are listed. have a look at this file!

regards,

thomas
  Reply With Quote

Old   February 13, 2004, 06:50
Default Re: Grid does'nt move!?
  #5
john
Guest
 
Posts: n/a
just another possibility- (This is applicable only when mesh is uniform and especially rotating mesh). If everything is fine, you may be moving the mesh such that next node is getting moved to the successive nonmoving node. This way mesh will appear as not moving. generally moving distance should be kept less that the half of the distance between two successive nonmoving nodes which are getting attached. If it is more than half the distance mesh will appear moving in opposite direction. Hope you understand what I am saying. Please check. regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Move particle in UDF Henrik FLUENT 5 July 29, 2008 10:55
how to move a set of vertex cthsieh CD-adapco 2 September 5, 2007 20:18
Turn and move Coord0 Aloise CFX 1 December 18, 2006 13:01
Making something move, not the air Cyril FLUENT 2 January 30, 2006 08:40
CFD Online Server Move Jonas Larsson Main CFD Forum 0 January 15, 2005 08:42


All times are GMT -4. The time now is 12:52.