CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

.run file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 3, 2004, 12:32
Default .run file
  #1
isidro
Guest
 
Posts: n/a
hi,

how can you set the '.run' file to give you the passive scalar (concentration) values. Every time I run my model the .run file has a field for all the passive scalars I've defined but every itteration it assign them '0' values (well 0.000000e00, something like that), but this is not true, when I plot them everyone has a different value in every cell. My guess is that it may be linked with the way I define the scalars, for example to define 'x' passive scalar I would use:'sc,#,defi,passive,ufef $X $sc,#,off'. This is how the star guide tells us to define them, but you dont get any information out of them at the .run file. Is there something you need to define to obtain this values at the run file, or is it nessesary to create your own information file for your passive scalars?

kind regards, isidro
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PLOT3D ASCII solution file to MATLAB data file Sandeep Rana Main CFD Forum 4 June 11, 2010 10:48
ParaView exiting while trying to save image file or movie file 21kalee OpenFOAM Paraview & paraFoam 3 January 23, 2008 17:01
Changing gambit file without change of case file?? Asghari FLUENT 2 August 28, 2006 14:48
Covert gambit file to polyflow file John FLUENT 5 August 6, 2004 09:31
Converting a surface file to a volume file Amir FLUENT 2 December 30, 2002 05:53


All times are GMT -4. The time now is 04:10.