CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Sublayer in Pro-am

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 8, 2004, 10:53
Default Sublayer in Pro-am
Posts: n/a
Hello! I've got a problem with the generation of subsurfaces in Pro-am. I want to generate sublayer in a pipe with an inlet. so i have angles of 90 degrees in this pipe. i want to have a sublayer with the same angles. but proam is pulling the corner of the sublayer very close to the corner of the normal geometry. every thing else is ok. just the corners...

hope somebody cn help me

  Reply With Quote

Old   June 9, 2004, 08:53
Default Re: Sublayer in Pro-am
Posts: n/a
HI Michael

Perhaps the solution would be to create/close an edge line on the surface before creating the subsurface. I am not sure, but maybe it will help you.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Viscous sublayer thickness Bo Busk Jensen Main CFD Forum 4 April 13, 2011 01:25
viscous sublayer in turbuelt flows student Main CFD Forum 0 June 22, 2007 05:05
High aspect ratio in viscous sublayer? Marius Main CFD Forum 0 December 22, 2005 09:15
abt k-ep and viscous sublayer AMV Main CFD Forum 0 December 3, 2002 10:05
sublayer guang ai CD-adapco 4 July 26, 2002 08:31

All times are GMT -4. The time now is 06:43.