CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

heat flux to heat rejection

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 23, 2004, 20:53
Default heat flux to heat rejection
Posts: n/a

Can someone help me issue the right command to convert a heat flux [W/m^2] result from a solid wall into a heat rejection value [W] over a non-planar solid area?

Seems like I would have to integrate the heat flux first before averaging it over the surface area. How to integrate heat flux over non-planar area?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ratio of total heat flux and radiative heat flux S.Karthikeyan FLUENT 2 July 1, 2008 03:48
combustion in low heat rejection engine M.MANI CD-adapco 0 March 18, 2006 05:27
WALL HEAT FLUX V.S. HEAT FLUX tommy CFX 0 December 15, 2005 09:14
Total heat transf. rate vs Total surface heat flux Renato Sousa FLUENT 0 August 22, 2005 10:34
Heat Transfer Coeff. at Heat Flux Boundary Rushyen CFX 6 January 18, 2001 06:09

All times are GMT -4. The time now is 17:16.