CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Balance checks

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 5, 2004, 13:45
Default Balance checks
  #1
Julie Polyakh
Guest
 
Posts: n/a
Hello,

From the balance checks file I've got that:

Materialwise enthalpy balance = Ein Eout = 2.224 (W)

It isn't good enough, is it?

What could be the meaning of such a difference?

What value is acceptable?

Regards,

Julie
  Reply With Quote

Old   July 5, 2004, 13:59
Default Re: Balance checks
  #2
4xF
Guest
 
Posts: n/a
How big are Ein and Eout? If it is in the range 1000-10000, the error 2/1000-10000 is more than negligible and you can consider your solution as converged (with respect to the enthalpy balance of course).
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to check Heat Balance in heat transfer like mass balance for flow mahendra OpenFOAM Post-Processing 15 February 8, 2012 11:19
BlockMesh checks msrinath80 OpenFOAM Native Meshers: blockMesh 1 April 16, 2007 06:47
Cell Quality Checks -> CPmatches Derek CD-adapco 2 August 6, 2004 04:36
mass balance Neser CFX 6 February 14, 2004 01:29
HOL // Mass balance Mehdi BEN ELHADJ Phoenics 0 September 4, 2000 14:56


All times are GMT -4. The time now is 13:26.