CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

ProAm meshing...Doubt

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2004, 11:49
Default ProAm meshing...Doubt
  #1
Antony
Guest
 
Posts: n/a
In Preprocessors like Gambit there is a facility for EDGE meshing using which we can control the number of cells and cell size in any region say.. valve region of an Internal Combustion Engine.. But if we want to fix the cell numbers and cell distribution in Proam meshing what procedure is to be adopted?

Thank you in advance for responding
  Reply With Quote

Old   July 20, 2004, 01:50
Default Re: ProAm meshing...Doubt
  #2
carno
Guest
 
Posts: n/a
you can explore prosurf. IN that similar options are there what u are asking. I have little exp on it.
  Reply With Quote

Old   July 21, 2004, 02:35
Default Re: ProAm meshing...Doubt
  #3
wak
Guest
 
Posts: n/a
You can also explore block meshing method by using prostar. If you have SBTC notes,it would be beneficial. I think SBTC notes you can get from your installation dir >>man.
  Reply With Quote

Old   July 22, 2004, 02:11
Default Re: ProAm meshing...Doubt
  #4
Antony
Guest
 
Posts: n/a
Thank you very much Wak.But the block meshing approach cannot be used for inclined valves... because when cut the block along the inclinde axis of both the valves it will interfer with each other. Hence I think Block Mesh approach may not be feasible for GDI engines with valves.
  Reply With Quote

Old   July 23, 2004, 00:55
Default Re: ProAm meshing...Doubt
  #5
wak
Guest
 
Posts: n/a
Your want to model ICE simulation right? for GDI. ProAM is automatic. Generate the mesh from surface data. Correct me if i'm wrong. Actually you can do mesh part by part by proam,valve,piston etc..but i'm not try this method yet. By this way you can control the mesh. I think Proam can't control mesh on line,face as in gambit. I've using prostar to mesh complex model,but time consuming and a lots of block creation.

Anyway,glad to share idea if u have about my explaination.
  Reply With Quote

Old   July 26, 2004, 05:31
Default Re: ProAm meshing...Doubt
  #6
anna
Guest
 
Posts: n/a
Hi,

with the Proam you can control the mesh density on the surface and inside the volume. you just have to distinguish the different surface cell types (time consuming in complex models, but it's working quite well), you can assign the different cell size and finally use the template approach for volume meshing, and play with the density factors. it is quite well explained in the tutorials

cheers

a.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing Problem Proam Phil CD-adapco 0 June 2, 2007 12:03
Help proam yogesh CD-adapco 8 February 16, 2006 06:19
doubt on meshing joe FLUENT 2 September 12, 2005 13:17
doubt on meshing a cylinder FELIX JOE S FLUENT 13 July 27, 2005 08:06
proam -subsurface meshing tak CD-adapco 3 December 30, 2004 11:23


All times are GMT -4. The time now is 06:59.