CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Subroutine for pressure boundaries

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 26, 2004, 16:05
Default Subroutine for pressure boundaries
  #1
Mir
Guest
 
Posts: n/a
I want give a pressure boundary as pressure depending on mass flow (or velocity) and I think I should use bcdefp subroutine. The variable PR is defined for each centroid on boundary region? I must run a parallel calcultaion. Could someone explain me how is possible using sets in order to have all file only in a processor? Thanks in advance.
  Reply With Quote

Old   July 27, 2004, 17:38
Default Re: Subroutine for pressure boundaries
  #2
steve
Guest
 
Posts: n/a
In parallel star will call all bcdef*.f subroutines on each processor where a boundary which has user subroutines actiavted.

So with this in mind the easiest thing is write a bcdefp.f that is independent of the processor. If you have to read a file, just copy it to all processors and you will be okay since this file will only be read if the appropriate boundary is on a processor.

If you need to do some sort of summing over a boundary to determine the mass flow/velocity then you should do this in posdat.f at level 2 and then make a call to the star parallel calls like GSUM. Making your code in this way will mean that you dont have to care about the decomposition of the mesh.

Your local support office should be able to give you a small example.

Otherwise use if you want to decompose by sets, use the info button in prostar to define the cells sets for the parallel run, then use the set decompostion option of star 3200 or prohpc and write your usercode as above without the GSUM etc calls.

In my opinion the effort to add the star parallel calls is very small once you have valid usercodes, thus the first method is much more general and less likely to cause problems if you apply your code other models.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mass & Pressure Boundaries kantipudi Main CFD Forum 0 February 5, 2009 13:37
pressure boundaries killian FLUENT 0 November 25, 2006 10:37
Seting up pressure boundaries Nori FLUENT 0 September 13, 2005 09:43
Using pressure specified boundaries in natural con Atit Koonsrisuk CFX 0 March 27, 2003 05:54
Pressure Boundaries gios CD-adapco 2 February 27, 2002 19:32


All times are GMT -4. The time now is 04:38.