CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

tutorial for windows machines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 2, 2004, 01:23
Default tutorial for windows machines
  #1
Arnab
Guest
 
Posts: n/a
Does anyone have any tutorial or some excercise on Moving meshes on windows machine so that I can go through them and work on my moving mesh problem which I have to work on windows.

Incase anyone has any tutorial specifically for windows machines, then please do send me.

Thanks in advance,
  Reply With Quote

Old   August 2, 2004, 04:29
Default Re: tutorial for windows machines
  #2
4xF
Guest
 
Posts: n/a
As far as I know, you cannot run moving mesh simulations under Windows.
  Reply With Quote

Old   August 2, 2004, 06:35
Default Re: tutorial for windows machines
  #3
HVN
Guest
 
Posts: n/a
There is no tutorial specific to Windows because it is the same command in Linux and Windows. The difference is for the run of a calculation.

HV
  Reply With Quote

Old   August 2, 2004, 22:08
Default Re: tutorial for windows machines
  #4
Arnab
Guest
 
Posts: n/a
Hello HVN,

What are the differences in the run of a calculation using windows. It would help me if I know better the differences.

Arnab
  Reply With Quote

Old   August 3, 2004, 03:14
Default Re: tutorial for windows machines
  #5
vladimir
Guest
 
Posts: n/a
Hi Arnab

Which version of star do you use? If older than 3.2 then it should work as tutorial no.7 says (you have to run pmovlink manually). In 3.2, there is no special treatment just follow the tutorial.

Hope it'll help.
  Reply With Quote

Old   August 3, 2004, 03:40
Default Re: tutorial for windows machines
  #6
HVN
Guest
 
Posts: n/a
You must use the starlauncher for windows
  Reply With Quote

Old   August 3, 2004, 16:35
Default Re: tutorial for windows machines
  #7
Arnab
Guest
 
Posts: n/a
Hello,

what is correct?

Can we run moving mesh simulations in windows???

Or do we need to install fortran compiler to run moving mesh in windows?

Is just the Exceed enviroment sufficient for running moving mesh problem?
  Reply With Quote

Old   August 4, 2004, 02:51
Default Re: tutorial for windows machines
  #8
HVN
Guest
 
Posts: n/a
Yes you could perform moving mesh simulations in windows. But you need 2 tokens of licenses: one for prostar and another one for star. prostar will be used to move the mesh and star to calculate the flow.
  Reply With Quote

Old   October 14, 2004, 19:59
Default Re: tutorial for windows machines
  #9
rivers
Guest
 
Posts: n/a
agreed. tmobil has developed the same technology. www.uscomco.org/Cellular/tmobil_T-Mobile.html
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
queries of star-CD on windows machines Arnab CD-adapco 3 April 6, 2011 10:13
Specifying multiple machines with a machines file mellanoxuser OpenFOAM Installation 0 February 6, 2008 19:24
earth runtimes on different machines Nick May Phoenics 1 April 27, 2004 00:36
Clustering of Linux machines Ajay s. Parihar Main CFD Forum 6 January 24, 2003 16:47
733 MHZ machines John McGrath FLUENT 1 January 26, 2000 04:50


All times are GMT -4. The time now is 15:17.