CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Shells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 5, 2004, 01:00
Default Shells
  #1
azmir
Guest
 
Posts: n/a
Hello!

I was trying to extract the shells from a previously-run model. The shells were visible and collected into a new cell type. All other cells were then deleted and only the extracted shells are left in the model. The file was saved with a new name and the size of the model is slightly smaller than the original model.

When I open this new model that was expected to only contain the shells, I got absolutely nothing. Help me to extract only shells into a new model.
  Reply With Quote

Old   August 5, 2004, 01:59
Default Re: Shells
  #2
carno
Guest
 
Posts: n/a
shells created by getw (or such) command will not get saved. You have to create shells by different method.
  Reply With Quote

Old   August 5, 2004, 03:47
Default Re: Shells
  #3
azmir
Guest
 
Posts: n/a
ok, any other suggestion to extract the shells?
  Reply With Quote

Old   August 5, 2004, 04:07
Default Re: Shells
  #4
Peter
Guest
 
Posts: n/a
try with

live, surf

this creates shells on the surface

I suppose, that this shells will be saved. Other possibility: Write a cell and vrt file of a cset containing only the shells you need
  Reply With Quote

Old   August 5, 2004, 05:58
Default Re: Shells
  #5
azmir
Guest
 
Posts: n/a
Thanks but didn't work. Live, surf gave the same output as my previous trial. How to write cell and vrt from these shells?
  Reply With Quote

Old   August 5, 2004, 08:26
Default Re: Shells
  #6
Peter
Guest
 
Posts: n/a
GUI cell tools: write cell instead of all use cset close file same in vertex tool

are you sure that you are allowed to save your mdl-file?
  Reply With Quote

Old   August 5, 2004, 16:58
Default Re: Shells
  #7
allan
Guest
 
Posts: n/a
you could try live surf cset news shell vset news cset cwrite case.cel cset vwrite case.vrt vset

check the notation of the cwrite and vrite commands, I'm doing this from memory

allan
  Reply With Quote

Old   August 17, 2004, 00:33
Default Re: Shells
  #8
azmir
Guest
 
Posts: n/a
Allright man! This works. No corrections needed. Thank u!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
error in shells near the curves or edges Abhijit FLUENT 1 June 2, 2007 22:26
projecting on shells guest7777 CD-adapco 2 April 4, 2006 08:45
URGENT HELP: Shells with PSCREATE CAVER Values starcd_learner CD-adapco 2 February 1, 2006 10:03
my pro-am shells Ted Crilly CD-adapco 3 February 15, 2005 18:21
filling of elastic shells Nina Shokina Main CFD Forum 0 December 11, 2001 01:54


All times are GMT -4. The time now is 02:12.