CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Drops evaporation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 26, 2004, 12:34
Default Drops evaporation
  #1
Julie
Guest
 
Posts: n/a
Hello,

Does somebody have an information on how does the number of droplets in a parcel affect the solution convergence and accuracy?

E.g. I have 20 parcels by 25402 drops of n-heptane in each. Density = 684 kg/m3. Initial velocity = 100 m/s. Drops diameter = 30e-06 m. Can this by itself cause solution divergence?

PS. I work on v3.150A.

Regards,

Julie
  Reply With Quote

Old   August 27, 2004, 14:56
Default Re: Drops evaporation
  #2
Jo
Guest
 
Posts: n/a
Usually, I have problem of convergence when the droplet properties are badly defined: especially density(T), Hv(T) and Ps(T). When correctly calibrated it works (notwithstanding, be carefull to the boiling model if you use the spray model)
  Reply With Quote

Old   August 30, 2004, 03:29
Default Re: Drops evaporation
  #3
Ossi
Guest
 
Posts: n/a
Julie, you should use "enough" parcels in your simulation. "Enough" must usually be established by trial and error. Test, say, three different amount of parcels and see if the results change.

The number of drops in a parcel is the outcome from the mass balance computation in your droico (if you are using one).

So all in all, you should worry about the number of parcels you use and let the code "worry" about the amount of drops in a parcel

I have never observed problems with having either 0.0234 drops / parcel or 1268 drops / parcel; the amount of drops in a parcel is purely a numerical issue.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
modelling rain drops cnrt Phoenics 0 November 28, 2008 09:55
Cp drops along the wind tunnel Francis Main CFD Forum 8 August 6, 2008 05:46
Cp drops along the wind tunnel Francis FLUENT 0 August 1, 2008 13:31
Plotting drops trajectory in v3.200 Julie CD-adapco 0 September 23, 2004 03:54
Coalescence model gives too big drops Ossi CD-adapco 3 April 29, 2002 03:31


All times are GMT -4. The time now is 19:12.