CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Error attempting to open X display (http://www.cfd-online.com/Forums/cd-adapco/54029-error-attempting-open-x-display.html)

pradeep PANTANGI September 13, 2004 10:01

Error attempting to open X display
 
Hi I Installed new version of star cd 3.22.001 for windows2000.But I am not able run the prostar.It is giving error as this Error attempting to open X display, without opening any window.Could you please help me in this regard. The dispalyed error is as fallows:

Feature starsuite expires in 260 days Error attempting to open X display Thanks&Regards Pradeep Pantangi

CFD September 13, 2004 20:08

Re: Error attempting to open X display
 
1)Are you sure you are using WINDOWS version?

2)Check your setting for the visualisation.

CFD


Dhandapani.s September 14, 2004 06:06

Re: Error attempting to open X display
 
Hi I you are using Windows,Then Problem is due to Exceed. Check it up.

Thanks Dhandapani

CFD(2) September 14, 2004 08:00

Re: Error attempting to open X display
 
If you are using Windoze, you'll be wasting your time in the long run, so I'll not offer any help.

If you are being sensible and using UNIX (incl. Linux), you've either got your DISPLAY set wrong (or not set at all) or your X terminal isn't accepting remote connections. If you are sitting at the machine: arse, then do the following:

1) In your STAR window, type: setenv DISPLAY arse:0 2) Open a local window on arse and type: xhost +


kevin September 14, 2004 14:19

Re: Error attempting to open X display
 
A question for you...

are you using the provided SCO XVision?

if you are, is you machine using an Intel graphics card?

There is compatibility issue between XVision and certain intel graphics cards.

pradeep PANTANGI September 14, 2004 14:25

Re: Error attempting to open X display
 
Hi kevin,

It is the problem with SCO XVision.Just I ran Xvision ones, then everything is ok!Now it is running.Any how thanks for your sugegstion Mr.Kevin.Also thanks to CFD,CFD(2) and Dhandapani.

Best Regards Pradeep


All times are GMT -4. The time now is 00:42.