CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Error attempting to open X display

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 13, 2004, 10:01
Default Error attempting to open X display
  #1
pradeep PANTANGI
Guest
 
Posts: n/a
Hi I Installed new version of star cd 3.22.001 for windows2000.But I am not able run the prostar.It is giving error as this Error attempting to open X display, without opening any window.Could you please help me in this regard. The dispalyed error is as fallows:

Feature starsuite expires in 260 days Error attempting to open X display Thanks&Regards Pradeep Pantangi
  Reply With Quote

Old   September 13, 2004, 20:08
Default Re: Error attempting to open X display
  #2
CFD
Guest
 
Posts: n/a
1)Are you sure you are using WINDOWS version?

2)Check your setting for the visualisation.

CFD

  Reply With Quote

Old   September 14, 2004, 06:06
Default Re: Error attempting to open X display
  #3
Dhandapani.s
Guest
 
Posts: n/a
Hi I you are using Windows,Then Problem is due to Exceed. Check it up.

Thanks Dhandapani
  Reply With Quote

Old   September 14, 2004, 08:00
Default Re: Error attempting to open X display
  #4
CFD(2)
Guest
 
Posts: n/a
If you are using Windoze, you'll be wasting your time in the long run, so I'll not offer any help.

If you are being sensible and using UNIX (incl. Linux), you've either got your DISPLAY set wrong (or not set at all) or your X terminal isn't accepting remote connections. If you are sitting at the machine: arse, then do the following:

1) In your STAR window, type: setenv DISPLAY arse:0 2) Open a local window on arse and type: xhost +

  Reply With Quote

Old   September 14, 2004, 14:19
Default Re: Error attempting to open X display
  #5
kevin
Guest
 
Posts: n/a
A question for you...

are you using the provided SCO XVision?

if you are, is you machine using an Intel graphics card?

There is compatibility issue between XVision and certain intel graphics cards.
  Reply With Quote

Old   September 14, 2004, 14:25
Default Re: Error attempting to open X display
  #6
pradeep PANTANGI
Guest
 
Posts: n/a
Hi kevin,

It is the problem with SCO XVision.Just I ran Xvision ones, then everything is ok!Now it is running.Any how thanks for your sugegstion Mr.Kevin.Also thanks to CFD,CFD(2) and Dhandapani.

Best Regards Pradeep
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Attempting to validate force code with 2D cylinder andrewburns OpenFOAM Running, Solving & CFD 41 January 3, 2008 00:55
Unable to open display Alan FLUENT 5 January 10, 2006 13:24
Error about open x display tyrouser CD-adapco 1 December 5, 2005 14:48
display error davis FLUENT 1 February 2, 2005 02:53
DISPLAY ERROR!! Alex FLUENT 4 February 12, 2004 10:40


All times are GMT -4. The time now is 03:23.