CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   How to correct the errors and warnings?? (https://www.cfd-online.com/Forums/siemens/54035-how-correct-errors-warnings.html)

Arnab September 14, 2004 14:21

How to correct the errors and warnings??
 
Hello,

I started again and made the model for tutorial 11.1 with star-cd V3.2 but I have some errors due to which i am having warnings while writing geometry file.

The errors and warnings are:

*error-74 there are cracks in the model

*error-265 model has groups of disconnected cells

Begining geometry write to file tut11 geom

** warning- no cell found for boundary 375 in region 5

** warning- no cell found for boundary 378 in region 5

Boundary set cleared

** warning- 2 boundaries not found on any cell in the model

guys, help me out.. can anyone tell me how to overcome these errors??

Thanks in advance,

AB

Hubert September 28, 2004 06:55

Re: How to correct the errors and warnings??
 
Hi,

error-74: - check the grid in the NavCenter - let it generate a new cset from the error cells (cracks) - first merge (using vmerg) the vertices - find out if there are double cells overlapping.

error-265: - that belongs to the previous error

there are some boundary faces for region 5 defined of cells which are already deleted. remove all the boundary of that inlet or outlet and generate new one.

I hope that helps

Hubert


All times are GMT -4. The time now is 01:13.