CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

color map problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 22, 2004, 05:48
Default color map problem
Posts: n/a

There are 20 colors for plotting. 14 is default. There is a transition from red to blue in the default mode.

I like to use 10 colors. "csca" controls number of colors plotted. However it uses available colors starting from red and it cuts somowehre at green. What I like to do is to plot 10 colors from red to blue. Is this possible and how?

Thanks. Abe.
  Reply With Quote

Old   September 22, 2004, 07:28
Default Re: color map problem
Posts: n/a
You can make your own colour maps for plots - and it's quite easy.

Try the following commands:

CLRT POST 1 1 0 0 RP10 0 1 -0.111 0 0.111

The first command sets post colour 1 to red, the second command repeats, incrementing red down by 0.111 and blue up by 0.111.



and you're done.
  Reply With Quote

Old   September 22, 2004, 07:30
Default Re: color map problem
Posts: n/a
Don't you hate the way this forum reformats everything?

There is meant to be a line break before RP10 in the first command line, and before REPL in the second.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
line color susan CD-adapco 0 September 5, 2007 04:51
color curves Le Stanc CFX 0 December 5, 2006 08:12
Color bar problem in ParaView tangd OpenFOAM Paraview & paraFoam 1 October 27, 2006 05:45
Color Daniele FLUENT 2 October 27, 2006 04:39
background color Nurul Murad FLUENT 2 August 30, 2001 01:45

All times are GMT -4. The time now is 03:46.