CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   centrifugal pump (http://www.cfd-online.com/Forums/cd-adapco/54079-centrifugal-pump.html)

novice October 7, 2004 08:56

centrifugal pump
 
Hi Experts, I want to simulate a centrifugal pump. I have experimental flow characteristics of the pump and I have to veryfy those in CFD. Now my question is what BC combination I should use for successful simulation?

Inlet vs outlet (split=1) or pressure vs -ve inlet at outlet or any other. Desperately waiting for ur guidance.

Thanks

Jörn Beilke October 8, 2004 11:54

Re: centrifugal pump
 
You can use:

1) pressure - pressure

2) inlet - pressure

3) stagnation - pressure

I usually use 1) and look for the mass flux. Going this way your flow will be reversed for the first iterations.

http://www.adapco-online.com/adapco_.../rotflow1.html

http://www.adapco-online.com/adapco_.../rotflow2.html

novice October 11, 2004 04:29

Re: centrifugal pump
 
Thanks Jörn



All times are GMT -4. The time now is 18:52.