CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

quasi 2D slice in proam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 18, 2004, 04:55
Default quasi 2D slice in proam
  #1
new-user
Guest
 
Posts: n/a
HI Experts!

Is there a way to create a 2d slice (one cell thick) in proam? because I am afraid that it will start growing mesh inside and away from the perpendicular shells (along z) it can produce more than desired 1 cell... I have already the surfaces describing my slice and my plan is:

1.create the mesh with proam (trimmed) this way I will obtain nicely meshed front face. 2.remove everything apart of this front face 3.extrude the front face.

Isn't it a bit 'oversophisticated'??? I am afraid that I must have missed something in the manual...

ps. does anyone have a template mesh for an octagonal crossection?
  Reply With Quote

Old   October 26, 2004, 03:01
Default Re: quasi 2D slice in proam
  #2
ping
Guest
 
Posts: n/a
No need to use pro-am - use command VCEX (extrude shells) in pro-STAR, or the STAR GUIde under Create 2D Grids to extrude shells just one fluid cell thick in say Z direction.

(You might use pro-am to smooth or remesh the surface say to convert triangles to quads etc first).

Not sure what you mean by octagonal template - if you mean just a simple octagon shape, try the PATCH command to create this in one of two patches then VMERGE then VCEX as above.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Average of SLICE in Paraview Maurice Waldner ParaView 5 March 28, 2014 16:58
Averaging pMean by slice cedric_duprat OpenFOAM Post-Processing 0 September 19, 2008 10:10
Section Slice in ProStar benbru CD-adapco 1 February 8, 2008 16:59
Tecplot Slice Alex Tecplot 2 April 28, 2006 08:28
How to save only a slice,not the whole data? leon CD-adapco 3 August 25, 2005 10:55


All times are GMT -4. The time now is 06:02.