CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Error: can't read face in model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 19, 2004, 10:54
Default Error: can't read face in model
  #1
coriolius
Guest
 
Posts: n/a
I have build a simple boolean model in STAR-DESIGN, save it and close the file by NOT SAVE SESSION or SAVE SESSION (have tried both).

Then, when I open the .CCD file next time, sometimes (in most cases) the following series of error messages appear:

face: xxx read from image file, but not in mode

and all solid model was lost, but all items in the PROBLEM DEFINITION tab remain.

What is the cause of the problem and how to eliminate this?
  Reply With Quote

Old   October 21, 2004, 08:47
Default Re: Error: can't read face in model
  #2
coriolius
Guest
 
Posts: n/a
The problem appears when I use LINEAR PATTHERN to create a flow domain by Boolean subtraction.

When I delete the linear pattern and create all the obstacles one by one. It is OK.

Is there any tricks or tips in using the LINEAR PATTERN and CIRCULAR PATTERN?

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent Read Error Joe FLUENT 4 September 23, 2008 21:16
Read cloud of points and interpolate on face centers bramdejager OpenFOAM Pre-Processing 2 September 5, 2007 05:13
FluentMeshToFoam Error A model face is not matched Shape detection failed vvqf OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 June 1, 2006 07:06
Read error sampaio OpenFOAM Running, Solving & CFD 8 April 19, 2006 08:44
Read/Write error Alec Eiffel FLUENT 6 June 8, 2005 01:53


All times are GMT -4. The time now is 14:28.