CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Proam:Poorly Formed Cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 10, 2004, 11:26
Default Proam:Poorly Formed Cells
  #1
Erika
Guest
 
Posts: n/a
Hi,

Finally I got a mesh with only 17 Poorly Formed Cells...must I fix them or they usually don't affect the numerical solution (I'm using Comet for a steady state simulation)?

How can I fix them? Using TetFix one by one? I hope not because I normally got 100 poorly formed cells!

Thank you,

Erika
  Reply With Quote

Old   November 11, 2004, 02:43
Default Re: Proam:Poorly Formed Cells
  #2
sankar
Guest
 
Posts: n/a
Hi,

very poorly formed cells may affect the convegance and it takes long time. If possible fix it using tetfix
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help proam yogesh CD-adapco 8 February 16, 2006 06:19
proam sankar CD-adapco 0 February 23, 2005 05:58
Proam cpmatches Erika CD-adapco 3 November 8, 2004 20:21
Shell cells to Fluid cells Mahbub CD-adapco 1 October 20, 2003 15:21
UDF: neighbour cells, upwind cells Dmitriy Makarov FLUENT 0 February 18, 2001 14:53


All times are GMT -4. The time now is 08:44.