CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Ver3.22 trimmed cell generation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 12, 2004, 02:20
Default Ver3.22 trimmed cell generation
  #1
Jihwan
Guest
 
Posts: n/a
Hi everyone

Recently I upgraded my STARCD from ver3.15 to 3.22. There are lots of good things in ver 3.22. One of the cool is that error-free sub-surface is generated.

However, I see that # of unresolved cell increases when I try to generate trimmed cell from a Template even though I am using the same geometry file in IGES format. My IGES file size is 40M byte for the geometry of a reactor (3 m in diameter) with lots of internals. The manual says I can lower the threshold in template generation until the unresolved cells does not appear. When I do that, I get more unresolved cells or similar. Anyway, there is no significant decrease in the #. Is this only for my case? Is there anybody who has the same experience as mine?

If anybody has a good strategy to reduce unresolved cell, please let me know. Thanks in advance.

Jihwan
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
v4 trimmed cell problem work Siemens 3 December 18, 2007 18:07
Pro-am trimmed cell export Sidd Siemens 3 December 6, 2006 02:50
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15
trimmed mesh novice Siemens 5 April 18, 2005 04:32
StarCCM+ polyhedra cell generation new-user Siemens 9 October 14, 2004 04:45


All times are GMT -4. The time now is 04:45.