CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Erro while running moving mesh in linux version. (http://www.cfd-online.com/Forums/cd-adapco/54165-erro-while-running-moving-mesh-linux-version.html)

xhliu1 November 13, 2004 01:32

Erro while running moving mesh in linux version.
 
Hello everyone!

When I using starCD3.15 in linux version to running moving mesh case of tutorial 7.1,it can not run correctly,and there are erros as

License info: CDLMD_LICENSE_FILE=/opt/starcd/license/license.dat (from ~/.flexlmrc)

Checking out starsolver

*** GEOMETRICAL CALCULATIONS STARTED *** GEOMETRICAL CALCULATIONS COMPLETED Could not find and execute PROSTAR

Can anyone tell me what's the problem,and what I should do to running correctly?

Thanks a lot!

xhliu1


Brian November 13, 2004 02:03

Re: Erro while running moving mesh in linux versio
 
You must run pmovlink first - that creates the script PROSTAR.

xhliu1 November 13, 2004 02:57

Re: Erro while running moving mesh in linux versio
 
Thank you very much,Brian!

I am sure that I have typed

starlink

pmovlink

and

star

after I running star,I have saw the information I have posted above!

xhliu1

Jörn Beilke November 13, 2004 06:37

Re: Erro while running moving mesh in linux versio
 
wrong !!

1) pmovlink

2) starlink

3) star


xhliu1 November 13, 2004 08:17

Re: Erro while running moving mesh in linux versio
 
But I have tried this turn of these words,but it does not work yet.

Jörn Beilke November 13, 2004 08:59

Re: Erro while running moving mesh in linux versio
 
What does it mean, the it does not work? What are the error messages or the output from each of the steps?

Just try it again:

1) load the model in prostar

2) connect the event file by using the command "evfi ,,"

3) connect the transient file "trfi ,, "

3a) if you have more than 1 load step defined do a "lsra 1 , XX" where XX is the max defined loadstep

4) write the geometry file "geom ,,"

5 ) write the problem file "prob ,,"

6) close prostar

7) run pmovlink

8) run starlink

9) run star

Look at the output from any of these steps.

haegar November 14, 2004 10:48

Re: Erro while running moving mesh in linux versio
 
Check if "." is in the path - it should be (echo $PATH)

Mahmoud Farghaly bady November 15, 2004 04:40

Re: Erro while running moving mesh in linux versio
 
How can I start the basics of the star CD program? From where?

xhliu1 November 15, 2004 10:25

Re: Erro while running moving mesh in linux versio
 
IF you use starcd of windows version you should double-press "starcd batch",set you working directry and press "prostar"on the batch. if you use starcd of linux or unix version you should enter your working directry and type "prostar",do as this, I think you can do what you want.

xhliu1 November 15, 2004 10:36

Re: Erro while running moving mesh in linux versio
 
My set file is

# .cshrc $ user specific aliases and functions

alias rm 'rm -i'

alias cp 'cp -i'

alias mv 'mv -i'

setenv PATH "/usr/local/sbin:/urs/sbin:/sbin:${PATH}:${HOME}/bin"

setenv STARDIR /opt/v3150

set path = ( /opt/v3150/bin $path)

set path = ( . $path )

set CDLMD_LICENSE_FILE=opt/v3150/license/license.dat

set prompt=\['id -nu'@'hostname -s'\]\#\

can you give me some advice?

Thank you very much!


All times are GMT -4. The time now is 03:54.