CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Erro while running moving mesh in linux version.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 13, 2004, 01:32
Default Erro while running moving mesh in linux version.
  #1
xhliu1
Guest
 
Posts: n/a
Hello everyone!

When I using starCD3.15 in linux version to running moving mesh case of tutorial 7.1,it can not run correctly,and there are erros as

License info: CDLMD_LICENSE_FILE=/opt/starcd/license/license.dat (from ~/.flexlmrc)

Checking out starsolver

*** GEOMETRICAL CALCULATIONS STARTED *** GEOMETRICAL CALCULATIONS COMPLETED Could not find and execute PROSTAR

Can anyone tell me what's the problem,and what I should do to running correctly?

Thanks a lot!

xhliu1

  Reply With Quote

Old   November 13, 2004, 02:03
Default Re: Erro while running moving mesh in linux versio
  #2
Brian
Guest
 
Posts: n/a
You must run pmovlink first - that creates the script PROSTAR.
  Reply With Quote

Old   November 13, 2004, 02:57
Default Re: Erro while running moving mesh in linux versio
  #3
xhliu1
Guest
 
Posts: n/a
Thank you very much,Brian!

I am sure that I have typed

starlink

pmovlink

and

star

after I running star,I have saw the information I have posted above!

xhliu1
  Reply With Quote

Old   November 13, 2004, 06:37
Default Re: Erro while running moving mesh in linux versio
  #4
Jörn Beilke
Guest
 
Posts: n/a
wrong !!

1) pmovlink

2) starlink

3) star

  Reply With Quote

Old   November 13, 2004, 08:17
Default Re: Erro while running moving mesh in linux versio
  #5
xhliu1
Guest
 
Posts: n/a
But I have tried this turn of these words,but it does not work yet.
  Reply With Quote

Old   November 13, 2004, 08:59
Default Re: Erro while running moving mesh in linux versio
  #6
Jörn Beilke
Guest
 
Posts: n/a
What does it mean, the it does not work? What are the error messages or the output from each of the steps?

Just try it again:

1) load the model in prostar

2) connect the event file by using the command "evfi ,,"

3) connect the transient file "trfi ,, "

3a) if you have more than 1 load step defined do a "lsra 1 , XX" where XX is the max defined loadstep

4) write the geometry file "geom ,,"

5 ) write the problem file "prob ,,"

6) close prostar

7) run pmovlink

8) run starlink

9) run star

Look at the output from any of these steps.
  Reply With Quote

Old   November 14, 2004, 10:48
Default Re: Erro while running moving mesh in linux versio
  #7
haegar
Guest
 
Posts: n/a
Check if "." is in the path - it should be (echo $PATH)
  Reply With Quote

Old   November 15, 2004, 04:40
Default Re: Erro while running moving mesh in linux versio
  #8
Mahmoud Farghaly bady
Guest
 
Posts: n/a
How can I start the basics of the star CD program? From where?
  Reply With Quote

Old   November 15, 2004, 10:25
Default Re: Erro while running moving mesh in linux versio
  #9
xhliu1
Guest
 
Posts: n/a
IF you use starcd of windows version you should double-press "starcd batch",set you working directry and press "prostar"on the batch. if you use starcd of linux or unix version you should enter your working directry and type "prostar",do as this, I think you can do what you want.
  Reply With Quote

Old   November 15, 2004, 10:36
Default Re: Erro while running moving mesh in linux versio
  #10
xhliu1
Guest
 
Posts: n/a
My set file is

# .cshrc $ user specific aliases and functions

alias rm 'rm -i'

alias cp 'cp -i'

alias mv 'mv -i'

setenv PATH "/usr/local/sbin:/urs/sbin:/sbin:${PATH}:${HOME}/bin"

setenv STARDIR /opt/v3150

set path = ( /opt/v3150/bin $path)

set path = ( . $path )

set CDLMD_LICENSE_FILE=opt/v3150/license/license.dat

set prompt=\['id -nu'@'hostname -s'\]\#\

can you give me some advice?

Thank you very much!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving Mesh Run problem - Scientific Linux G. SE CD-adapco 2 May 7, 2008 07:15
Running Fluent on Red Hat Linux WS version 4 Bob FLUENT 1 September 4, 2005 05:01
Help?Running erro? robert CD-adapco 1 January 21, 2005 11:43
Help???Subroutine running erro? blackhole CD-adapco 5 December 17, 2004 08:12
Can not using moving mesh in starCD of linux xhliu1 CD-adapco 4 October 17, 2004 09:12


All times are GMT -4. The time now is 12:52.