CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

view rotation in provis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2004, 05:31
Default view rotation in provis
  #1
Anna (aka new-user)
Guest
 
Posts: n/a
Hi,

I am using provis to prepare the pictures for the report of my prostar models. I've loaded it in -expert mode and now I am fighting with the view direction to have my model in the same position on all the pictures (and what is worse - the position I want), and of course the problem is, that the top of my model in prostar is diffrent (I mean the axes orientation), so now it is being loaded upside-down and I was trying to manipulate it with the view command combined with the angle command, but I am getting crazy, because it seems to be dependent of the previous view setting (and not writing all the operations to the echo file)...

I'd like to have the isometric wiev with the z axis to the top (in prostar you just say 'axis z' and it keeps it in mind)... so the command view 1 1 1, does not give me the view I wanted... I was trying to rotate it with the angle command... but I cannot decipher the axis around which it is being rotated at the moment...

do you have maybe the manual with the commands to the provis? because I am now using only what I can find in my echo file...

Thanks.

A bit dizzy

Anna
  Reply With Quote

Old   November 18, 2004, 22:10
Default Re: view rotation in provis
  #2
ping
Guest
 
Posts: n/a
The xy triad and screen angle widgets in the top right of the screen satify most needs - alway reset both using the square button on the bottom right of the xy triad and base of the angle widget.

Then start rotating - the widget arrows rotate exactly 15 degrees and clicking in the space between the arrow and slide rotate 30 deg - so you can easily reproduce any view. (pro-STAR have these features too)

Otherwise: In expert mode (stardesign -- expert from a DOS or shell window) allows the view and angle commands

view .3 .4 .1

angle 23

Sometimes this requires the command

tool command cometcad

in provis to activate it - don't know why?

Just need to experiment to get the correct view - don;t forget to inspect the triad x,y,z positions because this will help.

Have not seen a command manual - learn from the Procad.echo file history or the --expert mode history.

  Reply With Quote

Old   November 19, 2004, 07:11
Default Re: view rotation in provis
  #3
Anna (aka new-user)
Guest
 
Posts: n/a
Thanks

About the triad scroll in provis: have you ever had the 'real-time-spontanious-buggy-non-stoppable' animation of your model? you just click on the arrow and it starts rotating....

I will test this expert mode...

cheers

a.
  Reply With Quote

Old   November 19, 2004, 09:45
Default Re: view rotation in provis
  #4
Jamie
Guest
 
Posts: n/a
if the rotation won't stop, minimize the provis window and then maximize again.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pan view in fluent Ibuki FLUENT 1 January 15, 2009 11:21
Isometric View? linus chia FLUENT 3 January 16, 2007 19:11
View Factors Neelima FLUENT 0 October 6, 2006 15:26
how to view mesh Ogbeni CFX 4 December 29, 2005 10:29
A different view amorriison Main CFD Forum 1 May 27, 2003 15:11


All times are GMT -4. The time now is 15:35.