CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

cyclic match errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 2, 2004, 05:34
Default cyclic match errors
  #1
sankar
Guest
 
Posts: n/a
hi,

I have some issues regerding cyclic boundary condition. I am trying to match two cyclic boundary region, that lying parallel to each other in cartesian coordinate system. they donot have one 2 one correspondence. I am using arbitrary match option. it is giving error that offset must be opposite. what is the funda behind offset. please describe in detail

sankar
  Reply With Quote

Old   December 2, 2004, 15:25
Default Re: cyclic match errors
  #2
Brian
Guest
 
Posts: n/a
The offset is what must be added to one boundary to make it lie on top of the other.

So if Region 1 is at x=-0.5, and Region 2 is at x=1.5, the offset is xoff=2.0. If that doesn't work, try -2.0. I can never remember which way round it goes, and it doesn't matter, as long as it works, right?
  Reply With Quote

Old   December 3, 2004, 04:18
Default Re: cyclic match errors
  #3
sankar
Guest
 
Posts: n/a
hi,

Now the point is the offset to be specified in region1 or region2.ie in boundary region definition.

sankar
  Reply With Quote

Old   December 3, 2004, 07:46
Default Re: cyclic match errors
  #4
Brian
Guest
 
Posts: n/a
Both and opposite, as far as I understand it.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
match uds flux value between wall and wall_shadow pour FLUENT 0 May 18, 2008 11:29
error in cyclic boundaries match Steve CD-adapco 2 March 4, 2008 05:32
FLUENT Version Mis-Match Discrepancy asd Main CFD Forum 0 April 19, 2007 04:58
tutorial 7.4 cannot match tonggang CD-adapco 0 September 23, 2005 22:36
Cyclic Boundaries -> Match Option -> Arbitrary Derek CD-adapco 1 August 4, 2004 22:06


All times are GMT -4. The time now is 16:25.