CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

proam -subsurface meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 27, 2004, 09:15
Default proam -subsurface meshing
  #1
tak
Guest
 
Posts: n/a
sir,

i am new user to star cd and proam, my geometry involves six inlet manifolds with plenum( ic engine) i want to generate a volume mesh (trimmed cells) with 1mm layer using subsurface technique....but i failed to generate mesh with 1mm layer. Any idea why??? i need a help.

thanks in advance

kumar
  Reply With Quote

Old   December 28, 2004, 00:56
Default Re: proam -subsurface meshing
  #2
sankar
Guest
 
Posts: n/a
hi,

some times the subsurface mesh extrusion dosent work the way we desire. you can do one thing. use livesurf command in prostar and extract the outer surface and extrude it using VCEXT command.

  Reply With Quote

Old   December 28, 2004, 09:32
Default Re: proam -subsurface meshing
  #3
Volker
Guest
 
Posts: n/a
Have you done a surface check? Possible reasons for failure are disconnected areas in your surface or orientation problems. What error message do you get?
  Reply With Quote

Old   December 30, 2004, 11:23
Default Re: proam -subsurface meshing
  #4
tak
Guest
 
Posts: n/a
dear sankar and Volker,

thank you for your kind response. i made some corrections in the surface mesh and i am successful in generating a volumemesh with layer.

once again thankq

anand
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
subsurface failed star-user CD-adapco 4 April 9, 2008 05:58
Meshing Problem Proam Phil CD-adapco 0 June 2, 2007 12:03
problem in generating subsurface in proam?? Ramesh CD-adapco 3 March 14, 2007 16:47
problem in genrating subsurface with proam Mir CD-adapco 0 January 24, 2005 09:49
ProAm meshing...Doubt Antony CD-adapco 5 July 26, 2004 05:31


All times are GMT -4. The time now is 13:20.