CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

moving mesh problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 12, 2005, 12:26
Default moving mesh problem
  #1
walid
Guest
 
Posts: n/a
I have a moving mesh for SI engine. When I resume the moving mesh in es-ice, I do a "create ice template" but in the es-ice window I have this response: "The file 'valve0x.dat' is not readable, so the temporary file 'filename' has been created from its saved image. "(x=1,4)" After that, when I create the star setup (Ice template, star) I have the following warning: "63 vertices will be held fixed or will be translated with the piston". But still, it creates the "es-ice.PNL" The problem is in prostar, it cannot compile the model. Even if I run the model without calculation, that is, even if I just run the mesh using the adequate switch (in the menu "switches and real constants") I still have this problem. What can I do to resolve this problem? Could the problem be originating from the error explained above? (The file 'valve0x.dat' is not readable) And if so, how to rebuild them? For information, I create the star setup for the prostar version 3.2 my own version is 3.22 Thank you in advance for your help.

Kind regards.
  Reply With Quote

Old   January 15, 2005, 19:59
Default Re: moving mesh problem
  #2
Gudrun
Guest
 
Posts: n/a
I'd say that you, as a first try, should make shure that you have your valve01-04 files available in the running directory, as these describe the valve motion, and thus are essential for the mesh movement.

The valve-files are simply 2 columns of crank angle and lift for each pair of valves, so you shouldn't have a problem "rebuilding" them as long as you have info about the cam.
  Reply With Quote

Old   January 17, 2005, 05:27
Default StarCD tutorials
  #3
narendra kumar m
Guest
 
Posts: n/a
  Reply With Quote

Old   February 10, 2005, 09:55
Default moving mesh problem
  #4
Wendy Tjia
Guest
 
Posts: n/a
Dear walid,

Could I make a correspondence with you personally furthermore? Please let me know if you do not mind regarding my need to make a discussion with you.

Regards,

Wendy Tjia

  Reply With Quote

Old   March 8, 2005, 15:20
Default Re: StarCD tutorials
  #5
kapil
Guest
 
Posts: n/a
Can u plz send me the star cd tutorial pdf file or ny other readable format i would be very grateful to you ! kapil
  Reply With Quote

Old   March 9, 2005, 00:37
Default Re: prePDF in fluent
  #6
narendra
Guest
 
Posts: n/a
i am modeling comustion problem but facing problem with prePDF in fluent i dont know how to prepare prePDF plz can u help how to prepare prePDF and how to input in to fluent
  Reply With Quote

Old   April 1, 2005, 17:31
Default Re: prePDF in fluent
  #7
jair meza
Guest
 
Posts: n/a
can u help how to prepare prePDF and how to input in to fluent.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with moving mesh Sully FLUENT 7 September 11, 2008 00:38
Moving Mesh Problem Rashad FLUENT 0 August 28, 2006 04:31
moving mesh problem eos CD-adapco 4 January 27, 2006 21:42
Moving Mesh PROBLEM Arnab CD-adapco 10 October 30, 2004 02:10
Moving mesh problem Jan Majer CD-adapco 2 June 10, 2003 04:19


All times are GMT -4. The time now is 02:58.