CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Transient Cooling of Brake Drum

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 19, 2005, 00:35
Default Transient Cooling of Brake Drum
  #1
piyush
Guest
 
Posts: n/a
We need to perform the cooling analysis under transient conditions for brake drum (initially at 600 Deg). We are using Arbitrary sliding mesh, where we have divided Air (initially at 20 Deg) surrounding the brake into two zones - Fluid1 which is adjacent to the brake and Fluid 2 is the outside zone. We have tried to solve the problem but the solution diverges after few time steps. We would like to know if star-CD is capable of solving the problem or not.
  Reply With Quote

Old   January 26, 2005, 13:30
Default Re: Transient Cooling of Brake Drum
  #2
4xF
Guest
 
Posts: n/a
STAR-CD can solve the problem. For example, Daimler-Chrysler is solving this kind of problem for years.
  Reply With Quote

Old   February 7, 2005, 01:14
Default Re: Transient Cooling of Brake Drum
  #3
Palanivel
Guest
 
Posts: n/a
Hello Sir/Madem

I am doing project in brake drum.title is RRANSIENT THERMAL ANALYSIS IN BRAKE DRUM.Please give me some hints regarding that.what is the equations used to find the tempratures in steady state conditions and transient conditions.
  Reply With Quote

Old   February 15, 2005, 00:35
Default Re: Transient Cooling of Brake Drum
  #4
sadhis narayanan
Guest
 
Posts: n/a
hello sir,

i am also doing project in brake drum. plz tell your details and explan ur project

mail me sadhis
  Reply With Quote

Old   February 21, 2005, 06:18
Default Re: Transient Cooling of Brake Drum
  #5
viswanatha. bm
Guest
 
Posts: n/a
i want detail thrmal analysis of a bake drum
  Reply With Quote

Old   February 21, 2005, 21:16
Default Re: Transient Cooling of Brake Drum
  #6
Vinod
Guest
 
Posts: n/a
Dear Piyush,

Even I am working on the brake drum cooling problem. I am using FLUENT, with the similar approach I tried to solve the problem..but after 15 timesteps(with 0.01 sec time step), the problem was blowing off. I came to know later that after few radians of rotation, it was creating negative volume and hence it was diverging. It is always suggested to run grid motion before you solve it. If your grid motion is successful for one complete rotation you are through with it. Since i dont have much time to remesh and redo it, i am solving it by multiple reference frame option. It is giving reasonably good results. But for this you need hook source term UDFs in fluent. I am sorry i dont have exposure to star CD

regards

vinod
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat convection into a Disc brake Robin Windram FLUENT 0 February 20, 2009 08:03
Droplets size distribution in Boiler Drum Anderson T F CFX 1 June 19, 2007 18:20
rotor brake mAx FLUENT 0 September 13, 2006 01:47
transient cooling of brake drum wilson CFX 10 March 2, 2005 07:30
Brake Oil Cooling Veeranna CD-adapco 0 August 29, 2002 12:23


All times are GMT -4. The time now is 06:48.