CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Mixing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 19, 2005, 07:51
Default Mixing
  #1
Toni Vainio
Guest
 
Posts: n/a
I am mixing 2 fluids (water and ethanol) in a y shaped micromixer. I have managed to build the model and add ethanol as a scalar, and process the flow. Then I use "getc (or Getv) conc 1 popt cont replot" to find the concentration of scalar (i.e. ethanol as I used water as my background fluid) However, I find that the contours shown are not what I predict. On the one hand when I plot the particle tracks I can see that the fluid does not mix quickly. But on the other the contour plots show that the scalar reaches 50 % of the mixture very quickly. Also it appears that the mixing occurs before the two fluids actually meet which intuitively is not what I would expect. Brian, as you have been answering my questions I am sure you would know what to do. Please send me your email and I can send you some pictures and method in a word document and maybe if you have time you can help answer my question. This is my final year project at university and without your help I probably wont be able to finish it. I am stuck.

Many thanks Toni

Many Thanks!
  Reply With Quote

Old   January 19, 2005, 08:21
Default Re: Mixing
  #2
Richard
Guest
 
Posts: n/a
Particle tracks only show you convection. What about diffusion? Are the two scalars are diffusing into each other?
  Reply With Quote

Old   January 19, 2005, 08:31
Default Re: Mixing
  #3
Toni Vainio
Guest
 
Posts: n/a
Oh, I didnt know that particle tracks only show convection. I am interesested in how fast the two liquids mix. I.e speed of diffusion. Yes both liquids should be diffusing into each other. I am using a square pipe: 100 micrometre*100 micrometre channel and inlet velocities of 0.033333 m/s. Flow should be laminar.

I also import the y shape from IDEAS in mm and before processing the flow I scale it down to 0.00001 to change the sacle of the geometry. Maybe this is adversely affecting my results?

In theory it should take 5.95 seconds (taken from a book) When I do it it takes 0.03 seconds to mix. I basically want to find a way to find how quickly the particles mix.

Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
egr mixing subhash FLUENT 1 November 4, 2009 07:18
two gas mixing Brian FLUENT 0 July 11, 2008 12:20
ideal gas mixing law and mass-weighted mixing law Shankar FLUENT 0 June 24, 2003 13:25
Mixing prasat Main CFD Forum 0 May 26, 2003 04:32
Mixing John Main CFD Forum 0 November 20, 2002 12:21


All times are GMT -4. The time now is 18:02.