CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

How to generate internal view?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 25, 2005, 08:44
Default How to generate internal view?
  #1
Harendra
Guest
 
Posts: n/a
Hello Experts,

How to generate an internal view of a trim/tetra hedral cell grid in Prostar/Proam?

Regards,

-Harendra
  Reply With Quote

Old   January 25, 2005, 09:29
Default Re: How to generate internal view?
  #2
Stephane bone
Guest
 
Posts: n/a
A simple way to visualize your grid in prostar/proam is to click on "C->" Then Select New Zone. Define the Zone on your screen. Click on Cell Plot. Then, you have an internal view.
  Reply With Quote

Old   January 25, 2005, 09:47
Default How to generate internal view?
  #3
Harendra
Guest
 
Posts: n/a
Many thanks. It works. But forgive my one more question. How would I view through a slanted section of my geometry/mesh? That I want to view a sectional cut.

Regards
  Reply With Quote

Old   January 25, 2005, 09:57
Default Re: How to generate internal view?
  #4
Stephane bone
Guest
 
Posts: n/a
To have a better view, you can use the command line :

cset newset xmin,xmax,ymin,ymax,zmin,zmax,1 (to select properly the zone you want to see.)

1 is for cartesian, 2 for cylindrical...

Click on Cell plot
  Reply With Quote

Old   January 25, 2005, 10:40
Default Re: How to generate internal view?
  #5
steve
Guest
 
Posts: n/a
If you want a section slice:

1)click on the "Section slice button" - it will bring up a cursor that allows you to draw the slice through the current plot.

2)Click on "View->Snormal" to set the view normal to the section

3)Click on button underneath "Geometry Plot" and change it to either "Section (All)" or Section (Surface)" depending upon what you want to see.

You can also set everything individually by looking at the SPOINT, SNORM, VIEW, and PLTYPE commands
  Reply With Quote

Old   January 26, 2005, 01:42
Default Many Thanks to both Stephane Bone and Steve
  #6
Harendra
Guest
 
Posts: n/a
I really appreciate your help. Thanks a lot.

-Harendra
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TGridFluent mesh with internal by prism layer and internal face for diagnostic sponiar OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 March 30, 2009 15:02
Generate 3D PDF/other 3D view from Gambit Skander FLUENT 1 March 27, 2008 07:03
how to get fluid internal internal energy vbk FLUENT 0 December 17, 2007 02:54
How to generate BFC grid? zczhang Phoenics 2 December 17, 2002 10:00
How to generate a curve leo CD-adapco 1 November 19, 2002 04:52


All times are GMT -4. The time now is 06:31.